Things you don’t know about spanner tools

A spanner is a type of wrench or plier used in construction and mechanical repair. The word comes from span, which means something that stretches. This tool has been around for centuries and is still used today to fix and build things. 

These are often seen with other types of hand tools like screwdrivers, hammers, and wrenches. Spanners have three basic shapes: L-shaped (best for twisting), adjustable (has a sliding jaw), and T-shaped (can be either fixed or adjustable). 

T-shaped spanners are also called spanner sets as they come with multiple sizes so you can work on multiple-sized nuts at once. When choosing a spanners set, it’s important to note whether it’s made out of forged steel or cast iron. 

Forged steel will last longer but is more expensive than cast iron. When working with your hands all day long, having a comfortable grip is crucial. 

Many professionals use ergonomic handles that are designed to fit your hand perfectly so there’s no strain on your wrists or fingers when using them for extended periods of time. 

Some companies even offer custom handles if you have an unusual size grip! If you’re looking for high-quality products at affordable prices, check our website Just Visit https://www.ajayind.com/hand-tools/spanners/

 

A bench vice is a form of vise (a mechanical device that grips and tightens things) that is used in many workshops. A bench vice is normally mounted to a large flat surface like a table, but there are other types of vises that can be used for small jobs with less surface area on which to mount them. If you need help deciding whether or not to get a bench vice, see the benefits here!

What is a Bench Vice, and what are the benefits?

A bench vice is a type of vise that you can mount on the edge or end of your desk. The bench vice has two sets of jaws: one set to grip the workpiece, and another to hold the workpiece in place. Bench vises are used for many different tasks, such as shaping dowels or installing small parts. A bench vice is also handy if you want to drill holes in metalworking or carve sculptures from a block of wood.

How much weight can a bench vise hold?

Bench vises can hold up to 4,000 pounds of weight. This is because the head and tail vise are usually made from cast iron or steel. For safety reasons, it is recommended that a bench vise be anchored to a sturdy surface.

Which types of bench vises exist?

Bench vices come in a variety of shapes and sizes. Most of them are designed to be used on workbenches, but there are some that can be mounted onto tables as well. A bench vise is an essential tool for any lab or workshop. They're often seen in machine shops, metal shops, and auto repair shops. There are many different types of bench vises available, each with their own unique features that make them better suited to certain tasks.

Conclusion

Bench vises are versatile tools that can be used for many tasks pertaining to woodworking. They are very common in shops and garages due to the various uses they have. Bench vise provides a stable platform for planing, sawing, routing, sanding and more. They maintain stability even when it is clamped onto uneven surfaces or when large pieces need to be moved across its surface.

What is Bench and Uses of Bench Vices

 

Bench vices are a type of clamping tool that is used to hold an object so that it can be worked on. Bench vices are very useful tool for woodworking and metalworking.

The bench vice has two jaws, one on each end of the body. These jaws are typically made of metal or plastic and can be adjusted to grip an object of various sizes. The vice is mounted on a movable base which allows the user to move the vice in any direction with ease.

All You Need to Know about Spanner Tool and Its Uses

Spanners or wrenches are commonly used in industries. Spanners come in different types. You can choose a specific type of spanner tool that matches your requirements. In today’s blog, we’ll discuss the uses of a spanner and different types of spanners. Let’s get started:

What is a spanner tool used for?

A spanner is used to grip, tighten, and loosen the fastener, such as nuts and bolts. Spanners have one opening end that is used to hold a nut or bolt. Spanners can be used in various places. These tools come in different shapes to match the requirements. Spanners allow you to turn or rotate the fastener without causing any damage to it.

A spanner set is useful because it can reach those areas where regular pliers and wrenches can’t reach. If you need to tighten or loosen the bolts or nuts, then spanners can make your job easy. If you tighten or loosen the fastener by your hand rather than by spanner, then you can harm yourself. Different types of spanners can be used to unscrew an old pipe as well. A spanner gives you the grip you need to get the job done.

What do You Need to Consider When Buying a Spanner Set?

When you buy a spanner, then you have to consider a few points to make a perfect deal, such as:

·      Length

Length matters the most when choosing spanner tools. For instance, if you are dealing with a narrow space, then you need to consider the length of the spanner. A long spanner will allow you to reach a narrow space to get the job done easily. Suppose you want to turn a tight pipe in a narrow space, then you should choose a long spanner.

 

Material

While choosing a spanner, make sure to look at the material used to make a spanner. Ensure to check different parts of a spanner to know whether it is cracked from somewhere or absolutely in a good condition. If the manufacturer of spanners has used quality material, then you can be sure that it will long last.

 

·        Jaw Width

The next thing you need to consider is to check the width of the jaw. Spanners with wide jaw will ensure that they will better work with larger nuts and bolts. However, wider jaws will not be appropriate for small pipes. Spanner manufacturer will make spanners of different sizes and shapes, and you can choose that match your requirements.

What are different Types of Spanners Available in the Market?

There are various types of spanners available in the market, such as:

·        Open End Spanner

An open-end spanner is also known as a single-end spanner. As the name implies, its open end is used to hold the nuts or grips nuts or bolts to tighten or loosen them. The selection of the spanner will depend on the size of nuts and bolts.

                                                                                                                  Open End Spanner

Double Ended Spanner

In the double end spanner, as the name suggests both ends are opened to tighten or loosen the nuts or bolts. You can use it horizontally or vertically to get the job done more conveniently.  

Double Ended Spanner

 

·        Ring Spanner

Ring spanners give more control over the nuts as they don’t slip and do their job more efficiently. It easily grips the six-sided bolts and nuts. You can position its handle flexibly when adjusting the spanner head over the bolt or nut. Some ring spanners have offset handles, which reduce rubbing knuckles risk when you tight nuts on the plane surfaces.

 

                                                  Ring Spanner

·       

    Combination Spanner

The combination spanner is the combination of ring and open-end spanner. The size of the head of the combination spanner on both ends will be the same. A combination spanner is good for automotive use.

 

                                              Combination Spanner

           Stubby Spanner

A stubby spanner is a smaller version of a combination spanner that can be fitted easily in a narrow space.

                                                                          Stubby Spanner

·        Adjustable Spanner

If you want to buy one spanner that matches the different sizes of nuts and bolts, then buying an adjustable spanner would be the best option. An adjustable spanner needs extra care when you use it. When you use this spanner, you need to pull the spanner handle towards you rather than push it. Additionally, you can adjust the spanner size by adjusting the screw to clamp the spanner jaws tightly around the nuts. Adjustable spanners are best used in plumbing.

                                                                                                           Adjustable Spanner

 

·        Ratchet Spanner

It is used to tighten or loosen the nut, and you need to pull the handle in one direction or move the handle back and forth. In addition to this, you don’t need to reposition it every time you turn the nuts.

 

·      Socket Spanner Set

You can use a socket spanner to quickly tighten or loosen nuts and bolts without replacing them on daily basis. Its one end is round and forms square holes. Inside the square hole, the Tommy bar is fixed that also has a square shape.

 

Final Thoughts

You can choose a spanner that matches your requirements. Apart from the above-mentioned hand tools spanner, there are various types of spanners available in the market. Before you buy any spanner tool, make sure to check it properly. Maintenance of spanners is also required to keep them working in a long run. 

Grease Bucket Pump Uses

 Grease Bucket Pump Uses and Things to Consider before Using It

Among various lubricating equipment, a grease bucket pump is commonly used. Bucket grease pump is designed to grease tools that need lubrication regularly. It can be used in various fields from agricultural equipment to industrial tools. These grease pumps can be used by setting a high volume at high pressure. On high volume setting, the pump will deliver grease to make a smooth functioning of the machine. Before getting into detail, you must know what lubrication means and why is it important. Let’s get started:

What is Lubrication and Why Should You Use Grease Bucket Pump?

Bucket grease pump is the common category of lubrication equipment. Well, lubrication is used to reduce friction and allow machines to work smoothly and efficiently. The machine needs timely lubrication to work properly that’s why the lubrication process is important. Lubrication allows machine parts to slide smoothly and it also avoids metal-to-metal contact and keeps your machines running smoothly.

Primary Functions of Lubrication Equipment:

     ·  Reduce friction by developing a film between two surfaces

     ·  Prevent machine wear

     ·  Corrosion protection

     ·  Sealing

     ·  Transport contamination particles to filter for cleaning

     ·  Disperse heat from surfaces for cooling

Before purchasing any lubricating equipment, make sure to choose the best and reliable lubricant equipment manufacturer. Ensure to choose the right type and high-quality lubricating equipment.

Grease bucket pump is well-known and highly demanded lubricating equipment. Many manufacturers offer portable and hand-operated grease pumps. The grease pump has an openable cover and is easy to remove the handle. You can have different sizes of grease pumps for various applications.

Some lubricating manufacturers offer grease pumps with or without trolleys. Hence, you can choose accordingly. If you choose a bucket grease pump with a wheel, then it will be easy for you to use it effortlessly. There are various sizes, and types are available of grease pumps, and you can choose that best match your needs.

How to Use Bucket Grease Pump?

It is important to know how to use specific lubricating equipment. Take a look at the following section to know the steps of using a grease pump:

·  On the footrest, place your foot.

·  Hold the pistol nozzle in your hand.

·  Keep using it until the grease coupler releases grease. It may take around 20 strokes if you are using it for the first time.

·  If after 20 strokes, grease doesn’t come out, then shake the pump and start operating it again.

·  Connect the grease coupler with the grease fitting to lubricate the area that needs lubrication.

·  Keep operating it until grease is released from the coupler.

·  You can detach the grease coupler from the grease fitting, once greasing is done.

Under and Over Lubrication can be Harmful

Everyone knows what can be the result of under-lubrication: premature failure, increased parts wear, increased maintenance cost, and higher energy usage. On the other hand, over lubrication can also be harmful as it can put pressure on lube points, maximize downtime, and excess heat build-up. The solution to this problem is moderate or optimal lubrication.

Safety Precautions When Using Grease Bucket Pump

While using grease pumps, make sure to prevent yourself from harm. Have a quick look at the following section to know what safety precautions you should consider while using a grease pump:

·        The discharging nozzle should not be used towards yourself or anyone because it can harm your skin or eyes.

·        Unfortunately, if anything goes wrong, then contact your doctor as soon as possible.

·        Before using a grease pump, ensure to check it properly to find if it is loose or leaks, then you can replace it.

Grease Gun Uses and Benefits

If you are looking for the best bucket grease gun, then make sure to choose the right lubricating equipment manufacturer because quality matters a lot. A grease gun is commonly used lubricating equipment. A grease gun is used to move grease to a specific area of the machine to lubricate it properly.

·        Grease guns bucket can be used on lawnmowers to lubricate spindles.

·        You can use a grease gun to grease a chainsaw’s bar nose bearings.

·        Grease guns can be used on heavy-duty sports utility vehicles and trucks to lubricate their grease fittings.

·        Factory machine equipment and components can be lubricated with grease guns.

Summing Up

Lubrication tools are effective in reducing friction and allow machine components to work effortlessly. Grease and oil are the most common substances used to lubricate a surface. Grease includes oil and thickening substances to maintain consistency, and oil can be vegetable or mineral-based and synthetic. Before purchasing a grease gun or grease pump, make sure to choose someone who is reliable and offers you high-quality lubricating equipment. In addition to this, make sure to follow safety precautions while using lubricating equipment.

 

Spanner Tools Types and its uses

 A Spanner is a hand tool used to provide a grip for tightening or loosening the nut or bolt. Spanner Tools makes the work easy in applying torque to turn objects.

High-quality spanners are made up of chromium-vanadium alloy steel.

 Different Types of Spanner Tools: -

1. Double Open-Ended Spanner
2. Bi-Hexagonal Ring Spanner
3. Double Ended Ring Spanner
4. Gas Spanner
5. Combination Spanner
6. Stubby Spanner
7. Single Ended Ring Spanner
8. Double Open-Ended Spanner
9. Single Ended Open Jaw Slogging Spanner
10. Single Open-End Spanner

 These Tools are used in the number of places where nuts or bolts are used. These spanner tools are also used for domestic purposes.

 

1. Double Open-Ended Spanner

As the name suggested Double Open Ended, Both the ends are opened which are of different sizes. Both the ends are formed at an angle difference of 15-30 degrees in between their body. This spanner is mostly used spanner which is also used at homes.

 

                                                         Double Open-Ended Spanner

         2. Combination Spanner

In this spanner, one end of this spanner is ring type and another side is open. Combination Spanners are double-ended tools. This spanner tool serves the function of two spanners at once.

                                                               Combination Spanner

 

3. Bi-Hexagonal Ring Spanner

As the name suggests Bi-Hexagonal Ring Spanner, Both the ends are of Ring Type which is made up of Chrome Vanadium Steel. This tool is ideal for the professional or the home mechanic.

Bi-Hexagonal Ring Spanner

         4. Single Ended Ring Spanner

In this type of spanner one end is of Ring Type and another end is closed. These spanners are usually made up of chromium-vanadium steel which is durable and long-lasting. This type of spanner is used by professionals for tightening or loosening the nuts & bolts.

Single Ended Ring Spanner

Ajay Industries Produced these tools by taking care of quality products. The Quality of spanner tools are ensured through effective implementation, accurate checking and an entirely skilled quality system. Our Rigid policy of no compromise in quality comes into play at the beginning of our manufacturing process. For More Information about Spanner Tools @ Visit https://www.ajayind.com/hand-tools/spanners/ or call us at +91 9463518295.

Ajay Industries Woodworking Tools: DEFINITIVE GUIDE

 Ajay Industries Woodworking tools that cannot be missing in your workshop

If you usually work with wood, either as a hobby or for work, surely you already know the essential carpentry tools that you will need yes or yes.

In addition to these specific tools, having Ajay Industries hand tools in your carpentry workshop will be a great help. If you are a Leathermaniac, you will know what we are talking about. If you are new to the world of carpentry and DIY, keep reading because it will interest you.

How does a Ajay Industries multitool help you in your woodworking shop?

Once you have your set of woodworking tools, you only have one more piece left: Ajay Industries multipurpose. Why?

With multitool, you have several tools in one hand 

When you are working it can be very practical to have several hand tools always at hand without having to rummage through your toolbox again and again. You can carry it hanging from your belt or in your pocket and open it when you need it

Save space in your toolbox 

If you have your own workshop at home, every inch counts. If you want to save space for pliers, screwdrivers, files, and knives, you can concentrate it all in a single tool about 10 centimeters long.

It complements perfectly with other woodworking tools 

Are you driving nails and suddenly need pliers to remove a badly placed one?  Need to cut a small piece of wood with a smaller saw? Contact us today

What are the basic woodworking tools?

There is a long list of tools for woodworking. There is practically a tool for almost every task. To do any carpentry work, whether professionally or at home, it is essential to have the correct carpenter tools to do the job accurately and efficiently.

These must-have tools can be grouped into two categories: hand woodworking tools  (those that require manual action and our own strength), and power woodworking tools.

Hand carpentry tools

Carpenter's pencil

You will need a pencil to mark where to cut, where to nail, draw yourself a sketch ... don't forget!

Tape measure or tape measure

In any woodworking project, measurement is a very important step, since any variation will affect the final result. It is essential to have a precision tape measure and measure thoroughly. Taking the correct measurements is key to a perfect carpentry job.

Square and bevel protractor

A square will help you draw angles and check the degrees of the edges. The best squares for carpenters are the metal squares.

Level

To carry out carpentry projects it is also important to work with a good spirit level to verify the horizontality and verticality of the pieces of wood.

Chisel

Steel chisels are tools used by all carpenters, as they allow carving or cutting wood with clean cuts. They are a precise hammer blow drill and are used for carving wood, cleaning joints, or saw cuts.

Find a chisel that fits the size of your hand to make it more comfortable to handle. You will also need to keep it sharp and greased to keep it longer. We recommend chisels with a wooden handle covered with metal, for better resistance to hammering.

Hammer

This tool is vital as it is used for many tasks, such as nailing, striking, and adjusting. Choose a hammer that is powerful and light enough to be able to work without physically wearing you down.

Hand saw

Despite the existence of electric saws, in carpentry, the hand saw is still essential for working with wood, as it allows control of the cut. Both types of saw complement each other, so it would be advisable to have one of each. There are projects that require the patience and precision of a hand saw and others that require the cleanliness of the cut of an electric saw.

Files / Sandpaper

Files, as well as sandpaper, are tools in charge of removing impurities to give a final finish to the piece of wood.

Sergeants

Clamps are essential tools to hold pieces of wood so you can cut or file comfortably. There are sergeants of various sizes and you will have to adapt them to your project.

Workbench

A bench or work table is very useful to be able to support the piece of wood while you work. It will be easier for you to cut, drill, assemble, and sand. Some woodworking workbenches come with clamps so you can adjust the piece of wood.

Chisel

Chisels are used to make holes in wood and are similar to a corkscrew. Most people use power drills, but in the case of no power, a chisel will help you get out of the way. Also, thanks to the ability to control the force manually, they are very useful for precise and delicate work.

Rasps

Rasps are the tools used to scrape and smooth wood. They are used to remove the remains of sawdust.

Electric woodworking tools:

Obviously, although carpentry is a very artisan work, today there are power tools for wood that will make your life much easier.

Sander

Electric sanders are other essential tools for a carpenter. You will be able to smooth the surfaces and improve the final result of the wood that is being worked. They are also key for restoration projects to prepare a varnished surface.

Circular saw

The circular saw is a very versatile woodworking tool and has different cutting discs with more or fewer teeth. The cutting disc you use will depend on the type of work you are going to do.

Nail gun

If you want to be able to drive nails quickly and efficiently, a nail gun will save you a lot of time. If you are going to give it intensive and professional work, you will need a powerful nail gun.

Drill

The drill needs no introduction. It is an electrical carpentry tool that you must have at home, whether for large DIY projects or to hang a picture. You can drill the wood with different types of drill bits and diameters. Corded power drills are often more powerful and cheaper than cordless drills.